Payment & Shipping Terms:
|Voltage:||DC12-24V||Output Power:||12V: 288W, 24V: 576W|
RF 24 Key LED RGBW Sync Controller
RF 24 key Led RGBW Controller adopts the most advanced PWM (Pulse Width Modulation) digital technology with 4 channels constant voltage led RGBW controller. This model designed for RGBW/Y led products. Adopts RF 24 key remote, RGB and W each have independently control area without interference. Especially, it is designed with synchronization function. It is convenient to use RJ45 connector to connect the multiple controllers together, and achieve the synchronization function of thousands meters led strips. In theory, they can be connected numerous.
●Designed for RGBW constant voltage LED lights, Max.output:4*6A.
●Working voltage DC12-24V, it can be universal in this range.
●Adopts PWM digital technology, signal frequency: 400Hz.
●Multiple controllers can work synchronically when connected by network cable through the RJ45 connector, the network cable between 2 ports up to 80 meters.
●RF 24-key wireless remote, RF frequency: 433.92MHz.
●"W" channel can be turn on/off and adjust the brightness independently, and 3 brightness level hot keys.
●13 kind modes for RGB part, including 9 static colors and 4 dynamic changes; the brightness of static color and the speed of dynamic changes are adjustable.
●Warranty of this product is one year, exclude the artificial situation of damaged or overload working.
|Output gray||256 levels (with continuous reception)|
|Connecting mode||common anode|
|External dimension||L91*W88*H24 mm|
|Packing size||L106*W106*H66 mm|
|Output current||＜6A(each channel)|
|Output power||12V:288W; 24V: 576W|
Direction for use:
|W on/off||W brightness +||W brightness -||RGB on/off|
|100%||Static red||Static green||Static blue|
|50%||Static orange||Static sky blue||Static carmine|
|25%||Static yellow||Static cyan||Static purple|
|Speed +||Three colors jump||Three colors gradually change||brightness +|
|Speed -||Seven colors jumping change||Seven colors gradually change||brightness -|
If new-coded-remote is needed, re-pairing the remote and the receiver before using as below operation instruction:
1.Step 1: Pressing key "speed-" and hold on, power on the controller, the load LEDs will be 50% brightness white as responding.
2.Step 2: Continuously to press the key "speed-" for 3 times with in 5 seconds after step 1 ,the brightness of LEDs will change from 50% -10% as responding.
3.Code learning successfully, the LEDs will be back to the state before the power off, and the receiver can control by the remote.
4.If not, please re-operate from step 1 to 2.
1.Power and load interface:
Multiple controllers can work synchronically when connected by network cable through the RJ45 connector.
Application Circuit 1:(Synchronization function with network cable)
Application Circuit 2:
Product information for placing order
|Product name||Item number|
|RF 24 Key LED RGBW Sync Controller||NS-CON-RF20RGBW-4CH-LV|